Expandable Pot Lid Rack and Pan Organizer with Movable Steel Dividers

A telescopic rack that stands in a drawer or a cabinet and holds pot lids, pans, baking tins and cutting boards upright on their edges, each in its own slot, so you can see every one and lift out the one you want.

No lid balanced on a pile of pans. No digging to the bottom of the stack. Slide it out to the length of the drawer and file everything on its edge.

Stood on edge, everything is one reach away

Pans nest and plates stack, but lids, baking tins and boards do neither, so they end up in a leaning pile at the back of the cupboard. The one you need is always underneath. Getting it out means lifting everything above it, then putting it all back again. Stood upright in a row, the same things take up a narrow strip of the drawer, and each one comes out without moving its neighbors.

The dividers are stainless steel rods bent into a low M shape, with a rounded dip in the middle where a lid's rim settles. A glass lid, a frying pan, a sheet pan or a chopping board slides in between two of them and stays upright.

It grows to fit the drawer, and the gaps move with you

The base comes in two halves, a warm taupe one and a charcoal one, and the taupe half slides in and out of the charcoal like a drawer of its own. Closed, it measures about 12 by 8 inches. Pulled all the way open it reaches about 22 inches, so it suits a small cupboard as well as a wide pan drawer.

Both long sides carry a row of small slots, and every divider lifts out and drops into any facing pair of them. Set two close together for thin lids and boards, and leave a wider gap for a deep saucepan or a couple of cake tins. When the pans change, so does the spacing.

Drawer, cabinet shelf or counter

It stands on its own, with nothing to screw in or stick down. It goes wherever the pans already live: the deep drawer under the hob, a lower cabinet shelf, or the counter beside the stove for the lids you reach for every night. When you rearrange the kitchen, you lift it out and take it with you.

The three versions differ only in how many dividers come with the rack. Five suit a shorter drawer and a handful of lids, seven fill the rack at its everyday length, and ten are for the rack pulled out to its full length with a whole set of lids, pans and trays. Whichever you choose, the lid you want is standing up and waiting for you instead of sitting underneath everything else.

Specifications

Type: Expandable pot lid and pan rack

Material: Stainless steel dividers, plastic base

Finish: Matte taupe and charcoal base, satin stainless steel dividers

Dividers: 5, 7 or 10, depending on the version

Closed dimensions: 12 x 8 in (30.5 x 20.4 cm)

Extended length: 22 in (56 cm)

Adjustment: Telescopic base; every divider lifts out and fits any pair of slots along the two long sides

Holds: Pot lids, frying pans, saucepans, baking tins, sheet pans, serving trays, plates and cutting boards

Placement: Free-standing in a drawer, in a cabinet or on the counter

Lids and pans: Not included

Package Includes

1x Expandable Rack Base

5x Stainless Steel Dividers (5 Dividers version)

7x Stainless Steel Dividers (7 Dividers version)

10x Stainless Steel Dividers (10 Dividers version)